A delay coupling method to reduce the dynamical degradation of digital chaotic maps and its application for image encryption

Multimedia Tools and Applications - In this study, a novel delayed coupled chaotic model to reduce the dynamical degradation of digital chaotic maps is firstly proposed. In this model, we introduce...     

利用地震品质因子Q比例的分布特征预测南川页岩气藏保存条件

根据地震数据、地质资料和地震属性，开展了南川地区五峰组-龙马溪组下部页岩的地震品质因子Q平面上分布与页岩气保存条件评价研究。针对南川地区页岩气开发中的断裂破碎带，提出了一种获取稳定品质因子Q比例及界限的工作流程和相应的迭代算法。研究表明，地震品质因子Q比例的分布可以快速、直观识别出断裂破碎带的内幕特征与不同类型页岩分布区。其中，断裂破碎带页岩区的品质因子Q比例总体上偏小，大多低于0.2，局部超过0.5，平面上分布杂乱、碎斑状；页岩呈北东向展布的条带，被断裂所撕裂、破碎，保存条件较差。稳定分布的页岩区的品质因子Q比例是较高的，超过0.7，平面变化稳定，没有突变现象，保存条件好。微裂缝发育的页岩区的品质因子Q比例具有渐变的趋势性，品质因子Q比例的分布从该页岩区的边部0.7向中部有规律地减小至0.1，保存条件最佳。实践证明，高产气井大多位于稳定分布的页岩区或内部微裂隙发育的稳定页岩区，地震品质因子Q比例研究方法对页岩气保存评价与开发井优化部署是一个实用工具。     

Beam and image experiment of beam deflection electron gun for distributed X-ray sources

Distributed X-ray sources comprise a single vacuum chamber containing multiple X-ray sources that are triggered and emit X-rays at a specific time and location. This process facilitates an application for innovative system concepts in X-ray and computer tomography. This paper proposes a novel electron beam focusing, shaping,and deflection electron gun for distributed X-ray sources.The electron gun uses a dispenser cathode as an electron emitter, a mesh grid to control emission current, and two electrostatic lenses for beam shaping, focusing, and deflection. Novel focusing and deflecting electrodes were designed to increase the number of focal spots in the distributed source. Two identical half-rectangle opening electrodes are controlled by adjusting the potential of the two electrodes to control the electron beam trajectory, and then, multifocal spots are obtained on the anode target. The electron gun can increase the spatial density of the distributed X-ray sources, thereby improving the image quality. The beam experimental results show that the focal spot sizes of the deflected(deflected amplitude 10.5 mm)and non-deflected electron beams at full width at half maximum are 0.80 mm 90.50 mm and 0.55 mm 90.40 mm, respectively(anode voltage 160 kV; beam current 30 mA). The imaging experimental results demonstrate the excellent spatial resolution and time resolution of an imaging system built with the sources, which has an excellent imaging effect on a field-programmable gate array chip and a rotating metal disk.     

Optimal parameter choice of CR–RC~m digital filter in nuclear pulse processing

CR–RC~m filters are widely used in nuclear energy spectrum measurement systems. The choice of parameters of a CR–RC~m digital filter directly affects its performance in terms of energy resolution and pulse count rate in digital nuclear spectrometer systems. A numerical recursive model of a CR differential circuit and RC integration circuit is derived, which shows that the shaping result of CR–RC~m is determined by the adjustment parameter(k, it determines the shaping time of the shaper)and the integral number(m). Furthermore, the amplitude–frequency response of CR–RC~m is analyzed, which shows that it is a bandpass filter; the larger the shaping parameters(k and m), the narrower is the frequency band. CR–RC~m digital Gaussian shaping is performed on the actual sampled nuclear pulse signal under different shaping parameters. The energy spectrum of ~(137)Cs is measured based on the LaBr_3(Ce) detector under different parameters. The results show that the larger the shaping parameters(m and k), the closer the shaping result is to Gaussian shape, the wider is the shaped pulse, the higher is the energy resolution, and the lower is the pulse count rate. For the same batch of pulse signals, the energy resolution is increased from 3.8 to 3.5%, and the full energy peak area is reduced from 7815 to 6503. Thus, the optimal shaping parameters are m=3 and k=0:95. These research results can provide a design reference for the development of digital nuclear spectrometer measurement systems.     

悬浮法PVC树脂粒径的影响因素

讨论了悬浮法PVC树脂生产过程中影响树脂粒径的主要因素,有针对性地从聚合釜搅拌、反应配方、体系氧含量、pH值、聚合温度和转化率等方面提出了粒径的控制方案。     

数字模拟和USS通信电气组态试验箱设计

电气组态技术主要包括数字控制、模拟量控制、通信协议控制三种。本文设计了一种可以实现西门子S7-200系列PLC之间,及PLC和MM420变频器之间数字、模拟、通信控制三种实验,配合MCGS触摸屏显示效果的教学试验箱。学生可以在此试验箱上通过变频参数设置、 PLC程序设计、 MCGS触摸屏界面开发、电气电路选配,完成自动化组态技术中数字、模拟、通信协议控制的所有实验和技术操作。     

风电机组传动链典型故障特征提取方法

为解决风电机组传动链易发生故障的问题,文章阐述了风电机组齿轮箱特征频率的计算方法和基于振动信号分析的故障特征提取方法。结合实际情况,以行星级齿轮磨损、中间轴小齿轮崩齿、高速轴齿轮崩齿和发电机轴承电腐蚀等典型故障为例,通过齿轮箱特征频率和传动链典型故障振动信号基本特征分析,可较好地完成故障识别。结果表明,采用经典信号处理方法能对上述典型故障进行特征提取,验证了经典方法对单一、明显故障特征提取的有效性,为深入开展传动链故障特征提取方法研究奠定了基础,为风电机组故障检修维护提供了技术支撑。     

Scalable Clock Synchronization Analysis: A Symmetric Noncooperative Output Feedback Tubes-MPC Approach

In the cyber-physical environment, the clock synchronization algorithm is required to have better expansion for network scale. In this paper, a new measurement model of observability under the equivalent transformation of minimum mean square error (MMSE) is constructed based on basic measurement unit (BMU), which can realize the scaled expansion of MMSE measurement. Based on the state updating equation of absolute clock and the decoupled measurement model of MMSE-like equivalence, which is proposed to calculate the positive definite invariant set by using the theoretical-practical Luenberger observer as the synthetical observer, the local noncooperative optimal control problem is built, and the clock synchronization system driven by the ideal state of local clock can reach the exponential convergence for synchronization performance. Different from the problem of general linear system regulators, the state estimation error and state control error are analyzed in the established affine system based on the set-theory-in-control to achieve the quantification of state deviation caused by noise interference. Based on the BMU for isomorphic state map, the synchronization performance of clock states between multiple sets of representative nodes is evaluated, and the scale of evaluated system can be still expanded. After the synchronization is completed, the state of perturbation system remains in the maximum range of measurement accuracy, and the state of nominal system can be stabilized at the ideal state for local clock and realizes the exponential convergence of the clock synchronization system.      

吐哈盆地克尔碱凹陷煤层煤质特征与成煤环境

为了揭示吐哈盆地克尔碱凹陷不同矿区煤质形成条件，探讨该区煤质与成煤环境的关系，基于对主采煤层样品工业分析、有害组分及灰成分指标等数据分析，在对克尔碱凹陷地层分布、含煤岩系特征等基本地质条件分析的基础上，运用煤地质学、煤岩学、煤化学等理论和方法，系统总结凹陷内各矿区煤层赋存特征、煤质特征，探讨区内煤岩煤质与成煤环境的关系。结果表明：研究区自西向东划分6个主要矿区,区内煤层主要发育于中侏罗统西山窑组（J2x）和下侏罗统八道湾组（J1b）地层之中。研究区煤质呈低灰、低硫、高挥发分特征，煤灰成分以SiO2、Al2O3为主。综合分析表明，研究区中-下侏罗统主要煤层形成于湖泊-河流三角洲淡水沉积环境，具陆相成煤特征，成煤环境温暖潮湿。     

某含锌锡多金属硫化矿石锌浮选试验研究

某含锌锡多金属硫化矿石Zn、Sn、Fe、S含量分别为6.04%、1.05%、29.33%、19.08%，锌主要以铁闪锌矿、闪锌矿的形式存在，锡主要以锡石的形式存在，铁主要以黄铁矿、磁黄铁矿等形式存在，其中的金属矿物共生关系密切，相互包裹现象普遍。为确保不影响后续选锡，对锌浮选流程进行了试验研究。结果表明：矿石在磨矿细度为-0.074 mm占80%的情况下，采用预先脱硫—锌硫混浮再分离流程处理，在选择硫酸铜为锌矿物活化剂、丁基黄药为捕收剂、松醇油为起泡剂、石灰为黄铁矿抑制剂的情况下，经1段脱硫、2粗1扫锌硫混浮、1粗2精锌硫分离，锌硫分离精选尾矿与锌硫混浮扫选精矿2次精选后锌硫分离，最终获得锌精矿Zn品位47.06%、回收率90.76%，试验指标良好。